Monday, March 24, 2014

A Historical Ride


March 24, 2014

The blog post that almost didn't get written!

This blog post was about the history of Railroading in the Shawnee, Oklahoma area, and one of the prominent parts of it was to be the history of the A-OK Railroad that now has it's western routes based here in the Shawnee, area. And so, just as I was into it, and suffered a bit of writers block, I saved it and went elsewhere ..... including Facebook where, low and behold, a fellow bicycle rider in this area published a history of the A-OK railroad on Facebook. I was a bit unhappy about it ..... and I went back and wiped everything that I had written. After thinking about it for a while however, I realized that my blog post wasn't going to be about that particular railroad, but more of the impact of railroading in general to the history of this area. So, I decided to give it another try.

First off, lets go on back when there were no paved roads, and everything was dirt, and a few gravelled roads. Bicycles were more common than motorcars, and horses, or mules and wagons ruled the day.


Of course, you will just have to pretend it's on a dirt road. The gentleman driving this fine team of mules is training for a cross-Oklahoma mule trail ride, much like our bicycling freewheel ride.

So then ...... it's off the main roads, and on to gravel for a while on our historical tour.


Some was more dirt than gravel.



And some roads looked pretty good.



And then I came across the North Canadian River. This must have been a formidable obstacle for early travellers in this area. Certainly for the early railroads as this river floods violently in the Spring rainy season, making it difficult at best to maintain wooden trestle type railroad bridges.
 


 
 
There is still some historical farm implements scattered about also, like this old dump rake being used as a gate.
 

 
 
From there, I followed gravel roads and pavement back into Shawnee where we will begin our historical part of the tour. The old Santa Fe Depot here in Shawnee dates back to the 1890's and is now preserved as a museum and historical monument.
 

 
 
Believe me, it took a bit of concentration and effort to convince the bike to stand there and wait for me to take this picture. There is no kickstand on this bike, and the wind was blowing. Below is a shot of the front of the Depot with my trusty steed standing in front.
 

 
From there, it was downtown through Shawnee on Main Street, where I found this building ..... and from the description of their services above the doorway, it seemed to fit right in with the historical theme. One can almost imaging fur trappers bringing in their pelts and hides for barter. Probably not a pawn shop at that time either. It always amazes me that I can ride my bicycle right down through a two lane Main drag in the middle of the day, but there really is no problem.
 

Main Street, looking west.


The Rock Island Railroad had extensive services here as Shawnee was a major yard and maintenance facility. Today, this is how the old Rock Island shops look. This is now a grain and feed storage building.


But ..... back in 1911 it had an altogether different look, the look of a busy railroad service and maintenance facility.


The Rock Island was a busy place, and was one of Shawnee's largest employers at the time. The "Rock" also gathered up some of the smaller railroads in this area at the time, one of which was the fledgling Oklahoma and Arkansas Railroad which had rights of way and rails throughout the eastern Oklahoma coal fields, through places like Coalgate, McAlester, Krebs, and Wilburton. Today, the tracks between Shawnee and McAlester are abandoned, but the railroad still has plans of reconnecting .....darn ..... there goes another rail-trail down the tubes. As one might imagine, a railroad with that much influence and payroll would spawn cottage industries. One of the more famous, and one that is still operating today is Roundhouse Industries, makers of some of the toughest overalls made. They also made them in sizes to fit everybody, all the way up to an 80 inch waist size! A welcome industry indeed with all the workers in the rail yards needing just that type of clothing. Today, Roundhouse still makes overalls, still to the same overall quality and specifications, and while their location is no longer on Main street, they are still a part of the Shawnee economy. This picture is of their building on Main. From the looks of the cars, I'd say sometime in the Twenties. Shawnee's Main street is not nearly that busy today.



Another business that is still operating even though they had some rough times is the A-OK Railroad. Shawnee is the Maintenance and dispatch yard for the western Oklahoma region. Wilburton, Oklahoma services the eastern regions and Arkansas. Today, they are primarily a sand hauler for the oil field industry, as well as a grain hauler for our local Shawnee Mills. One of their engines was in the yard today and being serviced ...... note the pile of oil filters on the ground next to it. Twenty-four filters and 12 fifty-five gallon barrels of oil it takes for an oil change. They change filters regularly, but not oil, just top it off with a barrel or two.


After talking to the workers maintaining the engine if I could take my camera inside, they said "sure, climb on up", even though the engine was sitting there running at the time. So .... I did. Not too often one gets to see the inside of an operating railroad locomotive.





And a close up of the control block.


A railroad without a crane would be amiss. This is called a "Little Burro", and they were using it just a bit ago while they are rebuilding the trestle over the North Canadian River just east of town.


And, on the way home, the urge to stop and take a selfie was irresistable, especially under the shade of a convenient cedar.
 
 A fun thirty mile ride, over pavement, gravel, dirt and history.

 
 
 
 
 
 


Sunday, March 9, 2014

My Ding-A-Ling



March 9, 2014

My Ding-A-Ling

For the title, I will need to express an apology to Mr. Chuck Berry, but the name of his song turned out to be so appropriate in a funny sort of way. This will become evident later in the story .... but first ....

I've been wanting to get Eugene the Jeep out for a longer ride to see how well he would do.....


For those old enough to remember, this character, Eugene the Jeep appeared in some of the very early Popeye cartoons and was a do anything, anywhere, anyhow sort of creature. Nothing was too much for The Jeep. Supposedly, this is the character that the Jeep vehicle was named after, and it fits my new bike superbly as well. It does anything you ask it, and asks for more. So, today, I aired up the tires to 65 pounds because I was planning to stay on pavement for a 50 mile ride, and was not planning on getting off the pavement. Usually, if I'm on mostly gravel, I've found that 55 pounds works well with these tires. I may put on a bit wider tire so I can reduce the pressure a bit more. Today however, it was all pavement, so 65 it is ...... Seven miles after I left the house ..... hmmmm..... I wonder where that road goes, I've never been out there......


And so, we start a new adventure of gravel again.




I have to confess, I really like travelling gravel roads because traffic is very, very light to almost non-existent, and when a vehicle does pass you, they seem to do so very slowly and carefully, unlike the way they pass on pavement.



The gravel road eventually gave way to hard packed dirt, although with the recent rain and snow, some parts of it were decidedly more of a soft serve. Still, it was a great diversion, and turned out to be a wonderful road to travel. I did, however, regret airing the tires up so high before I left, and almost thought about dropping the pressure a bit, but I knew I'd be rejoining the pavement before long.


I love old farmsteads with windmills.



And then there was this bridge ..... sort of .... the sign said 3 tons, I think they were being optimistic. All wood, and gettin' pretty long in the tooth as well. Still, even though I've gained a few this winter, I was not approaching even close the the requisite 3 tons, so I went on across, and lived to tell the story.


This was the creek it passed over.


A little beyond the bridge was this "Mexican Fighting Cow"....  "Hey Gringo ....you better not be calling me Ha' ....Toro .... Or I'll show you how sharp we senoritas keep these horns" ....


Hard to do a ride without finding a pretty horse picture somewhere.


What about the title ....what about the title ........ Well, okay, a picture of "My Ding-A-Ling ..... but first the story to go with it. Shortly after the horse picture, I was just cruising along minding my own business when all of a sudden, out from some trees next to a farmhouse along the road this crazy dog tears out across the highway growling like he's going to start by taking off my leg first, and then see what else he wanted. I hollered at him .....never fazed him....he just kept coming..... just as he was reaching for my ankle (which was rotating furiously by this time) I rang my bell twice  ... ding-ding ... and it's LOUD ..... He skidded to a stop like I'd shot at him, and took off running for home with his tail between his legs. Either he had never heard anything like that before, or he was one of Pavlov's left overs, which, I don't know. I was surprised it worked that well. Probably just on that particular dog. The expression on his face was priceless. And so here is My Ding-A-Ling.... From there on, an uneventful ride back into and through town. Ran across Wayne just leaving his house for a short ride, but he didn't want to go as far as I was going because he was expecting some company. We chatted for a bit and then I went on through town, and being Sunday, right up Main Street.





Such a cool car required an even cooler frame ....



It was pretty highly modified, but I believe it to be either a Buick or Pontiac, around a 1941 model.



Considering that I worked for Sinclair when it was still Harry Sinclair's company, these old signs took on a special meaning for me.


Looking back up Main Street, on a Sunday afternoon, there is not much traffic to contend with.


One of the building murals on Main.


And so, another twelve miles from here, and I was home again. On the way back, I caught up with a runner wayyyy out of town, and it turned out to be an old friend and bicycle racer Gina Kraft. She has taken up distance running now, and is very fast. Figures, she was very fast on her bike and won many races. The bike performed flawlessly, and my ding-a ling worked better than I had ever thought. Saw hawks, doves, and Mexican fighting cows. What a day.

Monday, February 24, 2014

Hill and Gully Rider


February 22, 2014

Hill And Gully Rider

My apologies to Harry Bellafonte for the use of his song title as my blog post, but it fit so well.

If you read my last blog post, you would see that my mountain bike is no longer in my bike stable, replaced instead by a cyclocross hybrid bike .... my idea of a adventure bike. One of those "if I could only have one bike" kind of bikes. A do everything and anything as good as it can, kind of bike. So, it was time to give it a try and see how well it'll work out to that description.It took a bit of time to transfer over all my stuff onto this bike, but soon, I was ready to ride.



First ride, out my front door, a little over one mile of pavement then 10 1/2 miles of gravel and back 3/4 mile to my front door. Most of our gravel roads around here are pretty well hard packed and not much loose rock on them. The compromise Kenda tires did pretty well on this ride, the bike rolled easily over the gravel roads and I was very happy with the outcome. It even rode better than I thought it might. I think some of this might be due to the fact that the bike has a very long wheelbase, 110cm, about 4 cm longer than my tourer even. The bike felt light and nimble compared to my mountain bike on the same roads. I was encouraged enough to want to take the bike up to Stillwater for a 36 mile gravel grinder they were hosting on Saturday. I went on one of their rides before, and have been anxious to go back and try a bit longer one. So .... I made sure the bike was ready, loaded it up on my carrier and headed north Saturday morning.

I barely made it in time, the group was almost ready to leave when I showed up, however they waited for me to get ready. There were about six of us today. Most were seasoned local riders .... read strong here. I felt that maybe I was a bit out of my class, but they are a pretty friendly and forgiving group, and no riders are left out on the course. This time, the course went quite a bit further east into a very primitive area that was probably unchanged since saber toothed cats ranged free in the area. I kept my eyes open, just in case. I apologize for the few photos and poor quality as most were taken on the fly and on rough gravel roads as well. Leaving Stillwater it became evident that I was soon to be coupled with another fairly new rider from Tulsa, a young lady that by choice or chance, was about my speed and power on the hills. Neither of us knew the turns. We needn't have worried, however, as the ride leader was waiting for us at the top of the steepest hill on the way east. I found out why I wanted that triple crank right there on that hill. The ride leader got a couple of pictures of us climbing it together, and I was hoping he would post them on their F/B page so I could grab one to include here, but to no avail. If he ever does, I'll include it here. The hill was very steep, and fairly loose, making pedaling difficult at best. If I tried to stand for more power, I was rewarded with the back tire spinning out, had to remain seated to put the weight on the back and just slog it up the hill. I found the lowest gear I had on this hill, and was glad for my choice of gearing on this bike. This was to be an adventure bike after all, and not an endurance racing bike. The gravel roads up here in this area are mostly very loose rock scattered across the road, and in some places got quite deep. The bike again did better than I expected.


This route took us by the ghost town of Ingalls, and while there isn't many who live here, there are still a few that hang on according to the trash can. This little ghost town is famous for it's gunfight between U.S. Marshals and the Doolin/Dalton gang. It is my understanding that the outlaws won this battle, and managed to escape. One of them was killed in the hotel which is the prominent building here. I wished it wasn't trash day, but it was, and so there it is. Still an interesting sight.



After this, the roads got more and more primitive, and ranch homes were almost non-existent. In fact, I wondered a couple of times why the roads even existed at all ..... until I noticed an oil well or two.



After riding through a delightful little valley that was so scenic, but required both hands on the handlebars, so no pictures, we came to a turn back to the west to head back to town. Thank goodness, they decided on a short rest. The hill you see in the background is much steeper and longer than it appears here, and was just one of many just like it. Steep, long and loose was the order of the day.


The last shot was just moseyin' up the road headed west. The hills on this stretch tended to string us out a bit as you can see.


We went along on this road up, and down for about 8 miles before turning back north again to return to the main gravel back to Stillwater. When we turned north, I came to this really cool, not too long but steep downhill and decided to turn it loose .... got 32mph for a top speed going down, then hit a very large sharp rock near the bottom, and halfway up the next hill .....flat tire. Pinch flat from the big rock. My companion held my bike for me while I knelt on the rocky road (not very comfy) and changed out the tube, pumped it up with my trusty Topeak Road Morph to 6o pounds this time. I was only running 48. It'll take a bit of experimenting with these tires to get the right pressure for whatever roads I'm riding on at the time. I will say, however, that 32 mph on gravel is a real adrenaline pumper, but whether or not it was worth a flat tire is debatable. I'll take a minute to say a bit about handlebars here. All cyclocross bikes have road bars, I think it has something to do with the race rules. They are designed as racing bikes after all. I really felt that I would be more comfortable riding this type of road with mountain bike bars, and could not have been more pleased with my choice after this ride. They worked out great over the entire range of conditions. The alloy frame and fork also exceeded my expectations as well, very good riding in the roughest of conditions, and I always felt in control. When we got to the turn back to town point, my companion decided to go around again .... this would give her about 63 miles when the day was done. They grow them tough up here. I had enough .... I was very tired by this time and just eased it back to town. The next day, my legs got even with me for the torture I put them through by being really sore all day. Still, Sunday was a nice day, and I got out and rode a twenty mile loop from home and worked the kinks out. A great ride, a good trial for a new bike, and even though I was tired, I would do it again. The bike lived up to all my expectations, and I think once I get used to it and maybe get some wider tires eventually, it'll be a better bike for my style of riding than my faithful mountain bike. Happy Gravel Grinder ..... That's me!


Sunday, February 23, 2014

A Quick Ride

February 22, 2014


A change was in order, but it took me three months to find it.

To start with, the front suspension unit .... "Headshok", Cannondale calls it, failed again for the third time in the last three years. Mine is one of those "new fangled" air shock types with air spring and oil damping. Very light, and very responsive with great handling. I've got to hand it to Cannondale engineering .... what a great idea ..... Just too bad it don't work ..... Anyway, I have little patience with things that don't work for me, and I had decided when it went bad this time, that I was going to do something different.




The front shock portion goes through the oversize headtube and continues down to the fork crown, which makes it a very long steering tube. My first thought was to replace it with a standard mountain bike twin fork shock unit. Checked them out. I didn't want air..... still the same kind of problems, and even spring forks require regular maintenance. Also, the coil spring forks weighed 4 1/2 pounds (2200 grams). I don't really want an extra 4 1/2 pounds of weight hanging over the front end of the bike, thank you. So ...lets look at rigid. First off..... short head tube..... the bike frame is not really made for a rigid fork. I measured the length of the fork from axle to the bottom of the headtube (which would be where the fork crown would be on a normal fork) and found that the only forks that came close would be 29er forks. That's going to leave a lot of empty space between the top of my 26 inch tire and the top of the fork. Probably look rather ridiculous, and may have an effect on handling as well. The Niner carbon fork would have looked fine on the bike, and fit well for length and trail, but at almost $600 was not in my price range. Now that I'm retired for good, I no longer have unlimited amounts to spend on toys. So, still looking ....can't really decide. Looked at some cyclocross bikes, test rode one, and I didn't really care for it. It was light, it did handle well .... it was a road bike made with a frame width that would accept larger tires. It was also expensive. This sent me back to looking at my mountain bike again and what I could do with it. Three months of this agonizing went by .... until ...... I found the answer at our local bike shop .... I thought ..... It was an answer, but it still required a bit more attention. First ..... let us say goodbye to a beloved friend that took me many interesting places. I don't ride a mountain bike much, and this one had only about 2000 lifetime miles on it, but it took me to far away places and was my companion for so many unique and interesting trips and we saw so many wonderful things together. I'll miss you ...



                                         

Now, for the replacement. Cyclocross? They all seemed to be geared awfully high with 46/36 cranks and 11/28 cassettes on the back..... at least for me. There were many times I used all the gears on my mountain bike. I needed old man gears. I know, Oklahoma is flat, what do I need gears for. Well, I don't always stay right around here, and besides, Oklahoma isn't really that flat. I looked at newer 29er mountain bikes .... not really what I wanted either, heavy, slow handling, and not what I really needed. I don't jump off cliffs, or rock or root gardens, or really do much that would get me injured too seriously. Old bones take a long time to heal. So what? Back to looking at Cyclocross bikes ..... nope .... Wait ..... who was this wallflower in the back ...... sexy colored outfit ..... cute lookin' thing with her shiny brushed aluminum and black finish ... what is this? It's a Cannondale Quick CX-1 ..... a hybrid 'cross bike. A mixture of a Cyclocross frame and mountain bike gearing. Let me ride it! So he did .... I fell in love. Told him to put my name on it until the bike shop owner got back from Europe. It had a Headshok front end....... but, it was coil spring. Really didn't think it would be a problem until I talked to others that had bought the same bike and had a problem with the Headshok the first year. Take my name off....... more research! Okay ....... Cannondale also has a rigid model of basically the same bike. This one is designed around the rigid fork and the frame geometry changed to accommodate that style fork. Cheaper components, but still, all Shimano. And really, what I've found to be pretty much true is that the cheaper Shimano components are just as durable, or maybe more so because they are made from steel, not soft aluminum alloy, but they are heavier. That is the price you pay for the downgrade ...... weight. I had to assess requirements here, and not let fluff and shiny new stuff go to my head.

First: It had to be durable, and simple.

Second: It had to be relatively trouble free, and if there was maintenance I wanted to be able to do it myself, something I couldn't do with the Headshok.

Third:  It had to be cost effective. This is not my main bike, it is just one I grab for rides I want to do when I couldn't use the road bike, and didn't really want to use the touring bike.

Fourth:    It was to be a "beater" bike. Not one to wreck, but one I could take anywhere and do anything with without concern for it's fragile expensive components or frame. Cheaper components, and standard (not proprietary) components that I could replace cheaply and easily myself was also a necessity. This ruled out $2000 bikes, (the range of most cyclocross bikes). I also looked at steel bike manufacturers who seem to think steel is more expensive than carbon fiber. I thought about building one from a frame, and changed my mind.

Fifth:   It had to be geared to go anywhere I took it, and be capable of anything I wanted to do with it. This left out road bike gearing. Not many rigid mountain bikes to be found either.

So ...... I know .....if you've stayed with me this far, the suspense has to be killing you by now. Here it is ....




                                                                                     




Meet Cannondale Quick CX-4. It's a Hybrid bike that is a cross between a cyclocross and a mountain bike. A 'cross frame, and mountain bike gearing. Like most hybrids, it is a compromise. Because of the cheaper components, it is heavier than most 'cross bikes, but because of the lighter frame, and rigid front fork, (still mountain bike strong) it is still lighter than most mountain bikes. Not the sexy brushed aluminum and black finish of the CX-1, but I really liked the understated matte battleship gray no-nonsense color scheme. The bike came with 700/35 'cross tires, but has room for 40's. I thought I'd wear these out getting used to the bike and get what I really want (Clement Xplor MSO 40's) later. The front fork is an aluminum alloy, which I had trepidations about. I needn't have had. It rode better, in most places, than my suspension fork on the mountain bike. Cannondale's Fatty fork has a well deserved reputation for ride and handling, as well as toughness. The bike has gearing of  48/36/26 in front .... on a triple crank. The back has an 11/32 cassette. Low enough for get down and grunt gears, and high enough to suit my old man's need for speed, which isn't what it was when I was younger, a 30 mph bike, give or take a bit. Bare bike weight, before I put my stuff on it was around 23 pounds. Light enough to make me happy. The cost difference, including my trade in, (mountain bike needing repairs) was little more than a new standard coil spring suspension fork, and the labor to install it on my mountain bike. Now for a test ride or two ...... following in the next blog post .....

Monday, January 13, 2014

A Reunion in Tulsa


January 11, 2014;

I just love it when I manage to type in the correct year this early in the new year without making a mistake. 2014 ..... just seems like a Star Wars thing.

Now, where was I ....Oh yeah .... Saturday. Let's backtrack a bit back to last April 28th, The Flower Power Ride, it's here in this blog, .. 50 miles of wet, soggy bike ride that at times was so discouraging. About the only thing that kept me going was my faithful companion and new friend Dayna. Remember Dayna? It was her first organized ride, and what an experience it was for her, sometimes drizzle, sometimes pouring rain, and all day chilly. And here was this old guy trying to talk her into doing the 50 mile ride instead of the 30 she had planned on. In the end, she did the 50, and we both encouraged each other to finish. It turned out to be a great ride after all. Well ..... Dayna and I have remained friends ever since, and I think we have both benefited from our friendship.

Jump up now to Thursday, January 9th, 2014. Her; My birthday's coming up, and I want a pony.  Me;  How about I just buy you a beer instead.  Her;  We got to ride together again. Me; Okay, when. Her;  How about Saturday ..... Me; Okay, it's a date..... and that's how it began.

So, Saturday came, and while it was chilly, and a bit breezy, the weather was very nice for a ride, so I loaded up the tourer (she said she hadn't been riding for a while) and drove up to Tulsa, and enjoyed a wonderful reunion with a great friend. Her place was an easy ride to the bike path. Because it had been a while since she had ridden, it was decided to just do the Riverside loop, including the Turkey Mountain trot. North along the west side of the river, and back south along the east side. First order of the day ..... deciding how we were going to get to the bike path. She wanted to take the short route, and I thought it would be nice to include the cool downhill we'd get from heading straight south. She reluctantly agreed, and I really should have listened to her..... turns out that there had been a lot of tree damage due to the last ice storm, on the section I wanted to ride, and they had been trimming and picking up branches, while dragging lots of mud and debris on the trail. Bad choice, Richard! It was fine with the touring bike..... just let it go, and zip down through the mud and debris like it wasn't there, but her, with her road bike and 23 size tires, not so much. We did make it down to the Riverside portion, and the path was clear and dry. They were doing a bit of construction and had a section of the bike path closed, and we had to get on Riverside Parkway for a half mile or so. Busy, road, but we finally made it safely to the Bear Statue where we would cross the river and climb up Turkey Mountain. Stopped for a picture of the two of us.... She was glad we didn't get eaten. By the way ....yes, Oklahoma has black bears, in fact in some areas of the State, notably in the southeast, the can be quite a nuisance.


I didn't stop to take a picture of Turkey Mountain this ride, but I had one from a previous ride done in the summer months. Here it is.... up and over.


Hey ...... Natural Bridges National Park has nothing on Tulsa, and Turkey Mountain. This was taken at the top, just before the short, steep plunge down the other side.



And then, we left, went past the entrance to the mountain bike trails, and zipped down the back side. This is by far the steepest grade, and a bit of a challenge to climb. It is much, much more fun to go down this side. This is at the bottom, and Dayna, rounding the last curve at speed.



At the north end of the Riverside portion of the trail. From here, you can either go west to Sand Springs on the Katy Trail, or through downtown and north to Skiatook on the Osage trail, but we only had the afternoon, we were getting ready for a lunch break, so we crossed the river on old route 66, and headed back south again.




Right under the Route 66 sign was a new sculpture (they are always adding new art along the path) this, a scene depicting a team frightened by a flivver .... a scene probably played out in real life frequently shortly after the dawn of the 20th Century. Here, however, we turned south, and headed for Elwoods Blue Rose Cafe. This is a cafe and beer parlor that during the busy season has an open air patio, as well as an inside. All hanging over the Arkansas River and having a great view while you are eating. It's right directly on the bike path, and is a great hangout for bicyclists.



No pictures of the outside this time either. I should explain some of the lack of river pictures on this trip...... there was no river! It was all but bone dry. I'm assuming because they are trying to fill reservoirs upstream and not letting much down, or the snows in Colorado haven't melted yet, and there just isn't much water flowing down this far. So, it really didn't look too attractive. Next time. Here is the inside of the Blue Rose. First class entertainment weekend evenings here, and very atmospheric as well. Some mid ride refreshment was definitely in order here.



Sandwich's here are delicious, as well as huge, so we ordered one club sandwich (which comes with wonderful fries) and two plates. Kind of like the old soda and two straws thing ...... goin' Dutch. The sandwich lived up to it's reputation, it was great, and half apiece was plenty. I had a Blue Moon pale ale, which came with an orange slice in it ..... it was also very good. A wonderful mid ride stop. It would have been a good place to stay a bit longer, but we had only covered half the distance, and still had to get back to her place. So, we departed, and headed south once again. This time, when we got to the trail construction part, Riverside Pkwy was very, very busy, so we decided to ride the trail, even though it was under construction. We had talked to another rider that came from there, and he said it was just off and on gravel. So, off we went .... and it looked like this....



There were portions with large gravel and loose rock, however that made riding difficult. Not so much for me with my big fat tires, but it was for Dayna. Alas, the first casualty of the day occurred here in the form of a flat. Her thin Conti Race tires proved to be not up to the task, and I think a sharp rock managed to slice into the tire and got the tube. So ....being a gentleman, I changed her tire, and put in a fresh tube after checking thoroughly for a cause. Never found anything, but the tire was very, very thin. We walked the bikes the next quarter of a mile and climbed up and carried our bikes (Think cyclocross) up and over a berm at the end to continue on south. Shortly after this, we turned up the road leading back to her house, and finished our ride. This was not a long ride, at 25 miles, nor a fast one, but it was so completely enjoyable for both of us, and it got her back on her bike, with a promise that she'd be ready for the Flower Power this April. We gotta do that again!!!  Oh ... the pony? ....... No, but she got a bike ride and a beer and half a sandwich ..... can life really be any better?